The DobyGrip Size 2

The DobyGrip wire suspension system is currently available in 7 sizes, with suspended loads up to 500Kg (1100lbs) from a single unit, greater loads will require multiple DobyGrip locker units. Each DobyGrip locker unit has been tested to minimum safety factor of 5:1 in a vertical plane. For Angles below 90 degrees from the vertical refer to the table for the appropriate supportable load below.


 Wire Diameter



 DobyGrip DG2

 2.00mm (7x7)




 Angle from Vertical





60o max.

 % of Loading






 kg (lb)

50 (110)

45 (99)

 40 (88)

 35 (77)

 25 (55)


DobyGrip size 2 wire suspension locker unit has a width of 26mm, length of 30mm, height of 9mm and a weight of 28 grms. The unit comes packed in packets of 20 with an order code of DG2. 

All ratings were determined by independent testing at Northumbria University and witnessed by Lloyds Register.