The DobyGrip Size 1

The DobyGrip wire suspension system is currently available in 7 sizes, with suspended loads up to 500Kg (1100lbs) from a single DobyGrip unit, greater loads will require multiple DobyGrip locker units. Each DobyGrip wire suspension locker unit has been tested to minimum safety factor of 5:1 in a vertical plane. For Angles below 90 degrees from the vertical refer to the table for the appropriate supportable load below.


 Wire Diameter



 DobyGrip DG1

 1.00mm (7x7)




 Angle from Vertical





 60o max.

 % of Loading






 kg (lb)

 10 (22)

 9 (21)

 8 (18)

 7 (15)

 5 (11)


DobyGrip size 1 locker unit has a width of 16.5mm, length of 20mm, height of 6mm and a weight of 9 grms. The unit comes packed in packets of 50 with an order code of DG1.

All ratings were determined by independent testing at Northumbria University and witnessed by Lloyds Register.